ANALOG CHARPY / IZOD IMPACT TESTING MACHINE

Get a Price/Quote

MOQ : 1 Unit

ANALOG CHARPY / IZOD IMPACT TESTING MACHINE Specification

Gas Pressure
Not required

Operating Voltage
230 V AC

Accuracy
1% FSD

Temperature
10C to 45C

Application
Impact strength measurement of metals

Port Size
Standard specimen holder

Humidity
85% RH

Features
Dual test support (Charpy & Izod), Robust construction

Frequency
50 Hz

Mounting Type
Floor Mounted

Resolution
1 Joule

Automation Grade
Manual

Max Height
Approx. 1.35 m

Power Supply
230 V AC, 50 Hz

Response Time
Instantaneous

Interface Type
Manual

Specimen Size
55 mm x 10 mm x 10 mm (Charpy), 75 mm x 10 mm x 10 mm (Izod)

Number of Specimens
1 per test

Usage
Metallurgy, Laboratory testing

Capacity
300 Joules (Charpy) / 170 Joules (Izod)

Machine Weight
Approx. 120 kg

Test Speed
3.8 m/s (Charpy), 3.5 m/s (Izod)

Test Width
10 mm

Test Stroke
Standard as per IS/ASTM

ANALOG CHARPY / IZOD IMPACT TESTING MACHINE Trade Information

Minimum Order Quantity
1 Unit

Supply Ability
04 Units Per Month

Delivery Time
3-8 Week

About ANALOG CHARPY / IZOD IMPACT TESTING MACHINE

ANALOG CHARPY / IZOD IMPACT TESTING MACHINE
- For Charpy, lzod Tests for various materials.
- Model : 300-N is a per is3766-1977, is 1598-1977, IS 1757- 1988, IS 1499-1977 and BS 131 Part I , II, III, IV .
- Model : 300 -EN & +300-D Conforms to is , BS Standards as above & also conforms to BS EN 100456-1993 (For Charpy)
- Works on pendulum principle, Difference between height of pendulum before Rupture & Height of rise after Rupture of specimen is directly proportional to impact energy absorbed.
- Direct indication of impact energy absorbed by specimen on large dial for FIT-300-N, FIT-300-EN and on Digital Display for 300-D.
- Safety guard for the Pendulum.

Description	300 N, 300EN, 300 D	300 ASTM
Description	CHARPY	IZOD
Pendulum Drop Angle (Degree)	140	90
Pendulum Effective Weight (Kg.)	21, 300	21300
Striking Velocity of Pendulum (m/ Sec)	5.308	3.994
Pendulum Impact Energy (Joules)	300	170
Min. Scale Graduation (Joules)	2	2
(Only for FIT 300 D)	0.5	0.5
Distance between axis of pendulum to centre of strike (length of pendulum in mm)	813.5	813.5
Max. Total friction & Windage losses	0.5% of max. Impact energy	0.5% of max. Impact energy
Striking edge	.	.
a. Angle (Degree )	30	70
b. Radious of Curvaturer (mm)	2	0.7
c. Width at tip ( mm)	18	--
d. Horizontal relief (Degree)	--	10
e. Vertical relief (Degree)	--	5
Specimen Anvils and supports
a. Suitable for ma. specimen cress section(mm)	10x10	10x10
b. Distance between specimen anvils (mm)	40	--
c. Included angle of Anvil tip (degree)	79	--
d. Radius of curvature at Anvil tip ( mm)	1	--
Overall size (mm) (approx)	760(L) x 440 (w) x 1925(H)
Net weight (kg) (approx)	For model 300 N : 300 kg For model 300 EN : 450 kg For model 300 D : 450 kg

Dual Test Capability: Charpy & Izod

This testing machine supports both Charpy and Izod impact measurements, enabling laboratories to evaluate material toughness according to the requirements of IS, ISO, and ASTM standards. With separate test speeds and specimen sizes, the system offers flexibility for diverse testing scenarios.

Robust and Reliable Construction

Built with a cast iron base and powder-coated finish, the machine is engineered for durability and longevity. The alloy steel pendulum and manual release mechanism provide consistent, repeatable testing, while the safety shield ensures user protection during operation.

Accurate, Certified Results

The machine delivers high-precision results with a resolution of 1 Joule and accuracy within 1% of full scale. Calibration certificates are available on request to validate testing integrity, meeting strict industry requirements for quality assurance and traceability.

FAQs of ANALOG CHARPY / IZOD IMPACT TESTING MACHINE:

Q: How do I operate the Analog Charpy/Izod Impact Testing Machine safely?

A: To operate safely, ensure the safety shield is in place, use the manual lever to release the pendulum, and follow standard operating procedures outlined in IS 3766, ISO 148, or ASTM E23. Always confirm that specimens are properly mounted before initiating a test.

Q: What is the testing process for measuring impact strength?

A: Insert the standard-sized specimen into the holder, set the pendulum at its initial height, and use the manual lever to release it. The machine records the impact energy absorbed by the specimen with a frictionless mechanical pointer system, providing instant and precise results.

Q: When should I request a calibration certificate for this machine?

A: You should request a calibration certificate when compliance documentation is needed, especially for audits or quality assurance purposes in laboratory and industrial environments. Certificates are available upon request to ensure accuracy and reliability.

Q: Where can I use this impact testing machine?

A: This floor-mounted machine is suitable for metallurgy laboratories, research centers, academic institutions, and industrial testing facilities throughout India and abroad. Its robust design and standardized interface make it ideal for professional settings.

Q: What are the advantages of dual test support in this unit?

A: The machines dual support for Charpy and Izod tests allows users to evaluate metals under different impact conditions, enhancing versatility and enabling compliance with a broader range of testing standards and specimen specifications.

Q: How many specimens can be tested at one time and what sizes are supported?

A: The machine is designed to test one specimen per cycle. Supported specimen sizes are 55 mm x 10 mm x 10 mm for Charpy and 75 mm x 10 mm x 10 mm for Izod, with test strokes standardized as per IS/ASTM requirements.

Q: What are the benefits of the robust construction and powder-coated finish?

A: Robust construction ensures long-term durability and stability during repeated testing, while the powder-coated finish provides resistance to wear, corrosion, and environmental factors, maintaining the machines performance and appearance over time.

Tell us about your requirement